JVC KD-DV5300 - Manual (Page 27)

ENGLISH
27 SETTINGS
General settings — PSM
You can change PSM (Preferred Setting Mode) items
(except “SID”) listed in the table on pages 28 and 29.
1
Enter the PSM settings.
2
Select a PSM item.
3
Select or adjust the selected PSM item.
4
Repeat steps 2 and 3 to adjust other
PSM items if necessary.
5
Finish the procedure.
Adjusting the sound
1
2
Adjust the level.
BAS * 1 (bass)
Adjust the bass.
–06 to +06
TRE * 1 (treble)
Adjust the treble.
–06 to +06
FAD * 2 (fader)
Adjust the front and rear speaker
balance.
R06 to F06
BAL (balance)
Adjust the left and right speaker
balance. L06 to R06
LOUD * 1 (loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
LOUD ON or
LOUD OFF
VOL.A * 3 (volume adjust)
Adjust and store auto-adjustment
volume level for each source,
comparing to the FM volume level.
–05 to +05;
initial: 00
VOL (volume)
Adjust the volume. 00 to 30
(or 50)
* 4
* 1 When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the currently
selected sound mode (C-EQ) including “USER.”
* 2 If you are using a two-speaker system, set the fader
level to “00.”
* 3 You cannot make an adjustment for FM. “FIX”
appears.
* 4 Depending on the amplifier gain control setting. (See
page 29 for details.)
Continued on the next page
EN22-29_ADV5380[J]2.indd 27 EN22-29_ADV5380[J]2.indd 27 11/11/06 9:16:00 AM 11/11/06 9:16:00 AM