English 3, How to reset your unit, How to forcibly eject a disc – JVC KD-DV5300 User Manual

Page 3: How to use functions mode

Advertising
background image

ENGLISH

3

WARNINGS:
To prevent accidents and damage

• DO NOT install any unit in locations where;

– it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety

devices such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.
• If you need to operate the unit while

driving, be sure to look ahead carefully.

• The driver must not watch the monitor

while driving.

If the parking brake is not engaged,

“DRIVER MUST NOT WATCH THE MONITOR
WHILE DRIVING.” appears on the monitor,
and no playback picture will be shown.
– This warning appears only when the

parking brake wire is connected to the
parking brake system built in the car
(refer to the Installation/Connection
Manual).

For safety...

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.

How to reset your unit

• Your preset adjustments will also be erased.

How to forcibly eject a disc

• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.

How to use functions mode

If you press M MODE, the unit goes into functions
mode, then the number buttons and

5

/

buttons

work as different function buttons.

[Within 5 seconds...]

Indication language:
In this manual, English indications are used for purposes of explanation. You can select the indication language
on the monitor on the “LANGUAGE” setting (see page 30).

EN02-07_ADV5380[J]f.indd 3

EN02-07_ADV5380[J]f.indd 3

12/22/06 9:09:19 AM

12/22/06 9:09:19 AM

Advertising