JVC KD-DV5300 - Manual (Page 31)

ENGLISH
31 SETTINGS
Menu Item Setting
PICTURE
MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor.
OSD POSITION Select the on-screen bar position on the monitor.
• 1
: Higher position
• 2 : Lower position (Guidance below the disc setup menu will disappear.)
FILE TYPE Select the file type to play.
• AUDIO
: Play MP3/WMA/WAV files.
• VIDEO : Play DivX/MPEG Video files.
AUDIO
DIGITAL AUDIO
OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal.
• OFF
: Cancels.
• PCM ONLY : Select for an amplifier or a decoder incompatible
with Dolby Digital, DTS, MPEG Audio, or when
connecting to a recording device.
• DOLBY DIGITAL/PCM : Select for an amplifier or a decoder compatible
with Dolby Digital.
• STREAM/PCM : Select for an amplifier or a decoder compatible
with Dolby Digital, DTS, and MPEG Audio.
DOWN MIX When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT jacks (and through the DIGITAL OUT terminal
when “PCM ONLY” is selected for “DIGITAL AUDIO OUTPUT”).
• SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby
Surround.
• STEREO : Normally select this.
D. RANGE
COMPRESSION You can enjoy a powerful sound at low or middle volume levels while playing a
Dolby Digital software.
• AUTO
: Select to apply the effect to multi-channel
encoded software (excluding 1-channel and
2-channel software).
• ON : Select to always use this function.
OTHER
DivX
REGISTRATION This unit has its own Registration Code. Once you have played back a disc in which
the Registration Code recorded, this unit’s Registration Code is overwritten for
copyright protection.
EN30-37_ADV5380[J]f.indd 31 EN30-37_ADV5380[J]f.indd 31 12/19/06 6:58:54 PM 12/19/06 6:58:54 PM