JDS Uniphase WEB XPANDER RS-232 - Manual (Page 32)

v1.3c 11-Jun-2003
•
Removed sending CR to clear buffer before each command. Fixed problem
reading time from TimeCommander+.
v1.3d 17-Jun-2003
•
Corrected a condition where some X-10 commands were not being shown in the
history window
v1.4 30-Jun-2003
•
Updated to support new HVAC command format (STARGATE firmware 3.05d)
v1.5 7-Jul-2003
•
Switched to new compiler
•
Compressed web pages for storage in internal memory
•
Modified sendcommand.cgi and sendcommand2.cgi to be more efficient
•
Properly save and use updated SMTP server. Fixes a bug where a new
SMTP server would not take effect until a reboot
v1.6 16-Jul-2003
•
Added ability to update firmware via Network!!
•
Added SMTP Authentication
v1.6a 24-Jul-2003
•
Added additional option for SendCommand and SendCommand2 to allow
for a result prefix (i.e. result=xxxx)
ex: sendcommand2.cgi?var1=%23%23%2507&var2=str&var3=%23%230&
var4=webx&var5=webx&var6=result
•
Added additional TCP/IP socket buffer (to correct email or time sync failing due
to no available sockets)
v1.6b 28-Jul-2003
•
Changed the way dynamic network settings are applied (gateway and name
servers sometimes were not being set properly)
•
Added more diagnostics around internet time sync code (and retry on failure)
•
Added 'timesync' command to force internet time sync when issued from
debug mode (i.e. telnet to WebX, log in, type webxdebug, then type timesync)
•
Removed "Please Wait..." popup windows
v1.6c 30-Jul-2003
•
Fix in Dynamic HTML "Please Wait..." code to correct bug in Mozilla