Main menu, Recording preferences – JA Audio 9902S User Manual

Page 52

Advertising
background image

GB 52

MAIN MENU

Recording preferences

Changes made here will be the new default settings and will af-
fect recordings made to the disk.

Make new recordings

The settings made here will affect Normal and Timer recordings
only. Pause recordings are always erasable.

Recordings with the Erasable property will automatically be
erased in order to make space for new recordings. Refer to line
6, “Erase before record (hours)”.

If you select Permanent you can only erase recordings manually.
This means, that if you fill up the disk with Permanent record-
ings, no new recordings can be made until you clean the disk from
at least some of them. This could mean the difference between
success and disaster when you e.g. make a Timer recording.

The default and also recommended setting is Erasable.

Saved pause recordings

If you select e.g. 10, there will never be more than 10 pause re-
cordings
stored at the same time on the disk. For every new
pause recording you make, the oldest of them will automatically
be erased.

Please note, that this will only affect pause recordings, not the
“normal” recordings. Pause recordings have the word Pause as
an extension at the end of the line in the “List of recordings”.
See the figure to the right.

Subtitles

Select “Yes” if you want the subtitles in e.g. a movie to be re-
corded, or “No” if not.

Repeat playing

Normally you would want a playback to stop when it has reached
its end. If so, select “No”.

If you want the playback to automatically restart every time the
end is reached, select “Yes”.

Stop recording

While a Pause recording (not a normal recording) is still in
progress you can start the playback of it (= start watching it). In
the playback mode it is possible to use the “fast forward” func-
tion in order to catch up the live part of the programme.
When you do that, and you reach the end of the recording, one
of the two following things will occur.

• If you select “Yes”, which is the default setting, on line 5, :

When the end of the recording is reached by “fast forward” ,
the recording will automatically stop and the live programme
will be shown.

Advertising