JVC CA-MXJD8UW - Manual (Page 81)

14
Daily Operations
—Playback
¥ Turn on the power.
The STANDBY lamp on the main unit goes off.
• Without pressing
(STANDBY/ON), the System
also turns on by pressing one of the source select
buttons in the next step.
ø Select the source.
Playback automatically starts if the selected source is
ready to start playback.
• If you press AUX, start playback source on the external
component.
π Adjust the volume.
[ Operate the target source as explained
later.
To turn off (stand by) the system
Canceling the Demonstration
In this manual, the operation using the remote control
is mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.
3
1
2
1
3
1/¡
7,8
SHIFT
TOP MENU MENU
2
3/2/5/∞
ENTER
GROUP SKIP
4/¢
RETURN
10 Keys
The STANDBY lamp on the main unit lights
in red.
• A small amount of power is always
consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (standby) the System with
the volume set to an extremely high level;
Otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
Main Unit
ONLY
CANCEL
/ DEMO
DEMO START
DEMO OFF
2 sec.
MX-JD5&8[UX].book Page 14 Monday, April 26, 2004 2:22 PM