JVC CA-MXJD8UW - Manual (Page 87)

20
Adjusting the Front Speaker
Output Balance
You can adjust the output balance of left front speaker and
right front speaker within the range of R (right) –6
(minimum sound level from the right speaker) to L (left) –6.
Selecting the Sound Modes
You can select one of the preset Sound Modes.
Creating Your Own Sound
Modes—User Mode
You can create your own Sound Modes to make sounds suit
your taste. The changed settings can be stored as the USER 1,
USER 2 and USER 3 modes.
1 Select one of the preset Sound Modes.
2 Enter into the SEA Control Mode.
• You can enter the SEA Control Mode only while the
Sound Mode appears on the display.
3 Adjust the SEA pattern.
1 Select one of the tone—BASS
or TRE (treble).
2 Adjust the level of the selected
tone.
• You can adjust the bass and
treble level from –3 to +3.
3 Repeat steps 1 and 2 to adjust
the level of the other tone.
4 Finish the SEA pattern setting.
4 Select one of the User Modes.
5 Finish the setting.
SEA (Sound Effect Amplifier) modes
ROCK Boosts low and high frequency. Good for
acoustic music.
POP Good for vocal music.
CLASSIC Good for classical music.
User modes
USER 1/2/3 Your individual mode stored in memory.
See the next column “Creating Your Own
Sound Modes—User Mode.”
FLAT No Sound Mode effect.
Remote
ONLY
L/R BALANCE
R L
1 2
(holding then...)
Decreases the left
front speaker output
level.
Decreases the right
front speaker output
level.
POP CLASSIC
FLAT
ROCK
INFO
Main Unit
ONLY
SOUND
MODE
POP CLASSIC
FLAT
ROCK
SET
/ DISPLAY
TITLE
TITLE
PRESET
TUNING
SET
/ DISPLAY
PRESET
TITLE
SET
/ DISPLAY TITLE
MX-JD5&8[UX].book Page 20 Monday, April 26, 2004 2:22 PM