JVC GET0075-001A - Manual (Page 29)

29
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
2
Adjust the level.
Note:
Normally, the control dial works as the volume
control. So you do not have to select “VOL” to adjust
the volume level.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable items
change as follows:
Indication To do: Range
BAS Adjust the bass. –06 (min.)
|
+06 (max.)
TRE Adjust the treble. –06 (min.)
|
+06 (max.)
FAD* Adjust the front R06 (Rear only)
and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker |
balance. R06 (Right only)
LOUD Boost low and
high frequencies
to produce a
well-balanced
sound at low
volume level.
VOL Adjust the volume. 00 (min.)
|
50 (max.)
* If you are using a two-speaker system, set the fader
level to “00.”
LOUD ON
|
LOUD OFF
To increase the level.
To decrease the level.
Equalization pattern
changes as you adjust
the bass or treble.
VOL
(volume)
LOUD
(loudness)
BAS
(bass)
TRE
(treble)
FAD
(fader)
BAL
(balance)
EN29-31KD-LH7R_LH5R[E]f.pm5 1/18/02, 3:20 PM 29