JVC GET0075-001A - Manual (Page 41)

ENGLISH
41
EXTERNAL COMPONENT OPERATIONS
Aux input
Playing an external component
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See “To select the external component to
use – EXT IN” on page 35.)
1
Select the external component
(LINE IN).
• If “LINE IN” does not appear on the display, see
page 35 and select the external input (“LINE IN”).
• Displayed only when one of the following
sources is selected – FM, AM and CD.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See pages 29 – 31.)
Note on One-Touch Operation:
When you press CD/CD-CH, the power automatically
comes on. You do not have to press
to turn
on the power.
CD
LINE IN
EN41-41KD-LH7R_LH5R[E]f.pm5 1/18/02, 1:52 PM 41