JVC CA-EX70 - Manual (Page 19)

19
CA-EX70
Turning on the Power
Press POWER.
The STANDBY indicator goes out and “HELLO” appears in
the display.
•
Pressing POWER of RX-EX70 turns on the source
component previously selected.
• Pressing POWER of the other components also turns
on the amplifier/tuner.
To turn off the power
Press POWER again.
The STANDBY indicator lights up and the display shows
“GOOD-BYE”, then turns to the clock.
If you have made the Compu Link connection (page 40):
•
Other components also turns off.
Adjusting the Volume
From the front panel
Rotate VOLUME.
The volume level appears in the display.
•
Rotate to the right (UP) to increase the volume, rotate to
the left (DOWN) to decrease the volume.
• Rotate VOLUME quickly to make large changes, rotate
slowly to make small changes.
From the remote control
Press VOLUME or .
Press to increase the volume, press to decrease the
volume. Hold down to make a continous change.
• The volume can be set between 0 and 50.
Notes
• The volume cannot be changes while the unit is in the
STANDBY mode.
• Be sure to turn the volume down before setting the unit
to the STANDBY mode.
To mute the sound
Press FADE MUTING.
When you press FADE MUTING, the volume level
decreases to 0 (MUTING). Pressing it again restores the
volume.
Amplifier Operations
Goes out.
Front panel Remote control
STANDBY
POWER
VOLUME
UP DOWN
VOLUME
FADE
MUTING
POWER
EN01-22.CA-EX70[J]/1-5/21 98.6.8, 9:32 AM 19