JVC CA-EX70 - Manual (Page 37)

37
CA-EX70
Recording Timer
Use the remote control to set this timer.
It can be set during either power ON or STANDBY.
Be sure to set the clock before attempting this operation.
1 Press CLOCK/TIMER 3 times to display
“REC”.
2 Press CLOCK/TIMER again.
“ON” appears in the display.
3 Set the start time (ON).
1 Set the hour.
Use +/R or –/L to display the appropriate hour, then
press SET.
Hold down +/R or –/L to change the hour sequentially.
2 Set the minutes.
Use +/R or –/L to display the appropriate minute, then
press SET.
Hold down +/R or –/L to change the minutes in 10
minutes steps.
4 Set the end time (OFF).
Set the end time (OFF) in the same way you set the
start time (ON).
5 Select the preset station to be recorded when
the timer activates.
Select the radio station.
Press +/R or –/L repeatedly to select the desired preset
station, then press SET.
Blinks Blinks
Blinks
Blinks
After setting the minutes (before pressing SET)
Blinks
After setting the minutes (before pressing SET)
CLOCK
/ TIMER
– / L
+ / R
SET
– / L
+
/ R
SET
REC
EN27-39.CA-EX70[J]/1 98.6.8, 9:58 AM 37