JVC CA-EX70 - Manual (Page 29)

29
CA-EX70
To exchange CDs during playback of another
Press
0 corresponding to a disc number not shown in the
display to open that disc tray and exchange the CD.
When CDs are exchanged during playback, playback stops
after playing the last exchanged CD.
To skip to the beginning of a track
Press ¢ once to skip to the beginning of the next track.
Press
4 once to skip to the beginning of the current
track.
•
Each additional press skips to another track.
To check the playing time of a track
Press 4 or ¢ during stop mode to display the desired
track number. The playing time for that track is also
displayed.
Fast forward / reverse
Press
4 or ¢ on the front panel.
For fast forward, press and hold down ¢.
For reverse, press and hold down 4. Release the button
when the part you wish to listen to is reached.
•
These operations cannot be controlled from the remote
control unit.
Notes
• When CD 1, CD 2 or CD 3 is pressed, if there is no CD in the corresponding disc tray , “NO DISC”
appears in the display and the unit enters stop mode.
• When ‹/8 is pressed, if the disc tray corresponding to the disc number shown in the display
does not contain a CD, unit checks the other disc trays and automatically plays the first CD it
finds. If there are no CDs, the unit enters stop mode when it reaches the last disc tray.
Example) When disc tray of disc number 2 does not contain CD
EN27-39.CA-EX70[J]/1 98.6.8, 9:58 AM 29