Operating sequence, Load the laundry, Measure out the detergent – John Lewis JLWM1402 1400 User Manual

Page 10: Measure out the fabric softener, Switch the machine on, Select the desired programme/temperature

Advertising
background image

10

Operating Sequence

Before the first wash, we recommend that you pour 2 litres
of water into the main wash compartment

of the

detergent drawer in order to activate the ECO valve. Then
run a cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer
and start the machine.

WASHING 6 KG OF WHITE COTTON AT 90°C

Suppose you have 6 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.

1.Load the laundry

Open the door. Place the laundry in the drum, one
item at a time, shaking them out as much as possible.
Close the door.

2.Measure out the detergent

Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required and pour it into
the main wash compartment

.

If you wish to carry out the prewash, a soak
programme or a stain phase, pour detergent or stain
remover into the appropriate compartment marked

.

Important!
Do not use normal detergent for the “Stain” option,
always use a STAIN remover.

3.Measure out the fabric softener

If required, pour fabric softener into the compartment
marked ,

without exceeding the «MAX» mark.

C0112

C0111

P0004

Close the drawer gently.

4. Switch the machine on

Turn the selector dial to the 90° programme to switch
the machine on. To switch the appliance off turn it to
Off”.

5. Select the desired

programme/temperature

Turn the selector dial to the desired position. The lights
relevant to the phases that form the programme will
light up.

The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The Start/Pause button
light will start flashing.

If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the cycle.

If your laundry needs a soak time, turn the programme
selector dial to “Soak 30°” and then, before starting a
washing cycle, drain the water as described in the
Soak 30°” paragraph.

Prewash
Wash
Rinse
Rinse hold
Drain
Spin
Filter
End

2.05

30 Minute wash

Cold
30°
40°

W

ool

90°

Economy 60°

Economy 40°

60°

40°
30°

Cold

60°

40°

Economy 40°

Easy iron 40°

Cottons

Synthetics

Spin
Drain
Softeners
Rinse
Soak 30°

Delicates 30°
Duvet 40°

Off

Advertising