Edit from a camcorder, Pg. 42, Editing – JVC DR-MV5BEK User Manual

Page 42: Dvd vhs, Standby/on

Advertising
background image

Filename [MV5SEK_08Basic TimerDub.fm]

Masterpage:Left+

42

EN

EDITING

Page 42Wednesday, 31 August 2005 19:58

You can use a camcorder as the source player and your unit as the
recording deck.

1

Make connections.

A If the camcorder has no S-VIDEO output connector:
— connect the camcorder’s AUDIO/VIDEO OUT connectors to the
unit’s [VIDEO/AUDIO ((MONO) L/R)] input connectors on the front
panel.

● When using a monaural camcorder, connect its AUDIO OUT

connector to the [AUDIO-L] input connector on your unit.

B If the camcorder has an S-VIDEO output connector:
— connect the camcorder’s AUDIO OUT and S-VIDEO OUT
connectors to the unit’s [AUDIO] and [S-VIDEO] input connectors
on the front panel.

2

Press VHS/DVD on the unit repeatedly to select the recording

deck.

3

Press PR +/– to select “F-1”.

● Set “F-1 INPUT” to “VIDEO” for the [VIDEO] input connector, or

“S-VIDEO” for the [S-VIDEO] input connector, depending on the
connector being used. (

੬ pg. 45)

4

Press REC MODE repeatedly to set the recording mode.

5

Start playback on the camcorder slightly before the actual point

from where you wish to start dubbing.

6

Press 7 on the unit to start recording. Or while holding 7, press

4 on the remote control. The dubbing starts.

7

Press 8 on the unit, then stop playback on the camcorder.

NOTES:

● All necessary cables can be obtained from your dealer.

● Refer to the camcorder’s instruction manual for operating procedure.

● The quality of dubbed picture becomes poorer than that of the

original.

Edit From A Camcorder

VHS/DVD

DVD

VHS

REC

VHS

DVD

DUBBING

PR

DV IN

STANDBY/ON

S-VIDEO

VIDEO

AUDIO

A If the camcorder has no S-VIDEO output connector:

Recorder

Player

To [VIDEO/AUDIO
((MONO) L/R)] input

Audio/video cable (not provided)

AUDIO/VIDEO OUT

Your unit

VHS/DVD

DVD

VHS

REC

VHS

DVD

DUBBING

PR

DV IN

STANDBY/ON

S-VIDEO

VIDEO

AUDIO

B If the camcorder has an S-VIDEO output connector (DVD
deck only):

To [S-VIDEO]

input

To [AUDIO] input

S-video cable
(not provided)

AUDIO OUT

Audio cable
(not provided)

S-VIDEO OUT

Recorder

Player

Your unit

● Slide the TV/DVD switch to DVD.

MV5SEK_00.book Page 42 Wednesday, August 31, 2005 7:58 PM

Advertising
This manual is related to the following products: