On-screen message – JVC DR-MV5BEK User Manual

Page 94

Advertising
background image

Filename [MV5SEK_13Subsidiary.fm]

Masterpage:Left+

94

EN

TROUBLESHOOTING

Page 94Wednesday, 31 August 2005 19:58

On-screen Message

● A disc that is not registered in the library has been inserted.

Register the disc as necessary. (

੬ pg. 71)

● Appears when a title that has been selected in the library is not

contained in the loaded disc.

● Recording and/or editing cannot be performed.

● The number of titles exceeds 99.

● The number of play lists exceeds 999.

● To set the timer programme, the clock must be set in advance.

(

੬ pg. 88)

● You can programme each deck to timer-record as many as 8

programmes. To programme more, you need to cancel a timer
programme already set. (

੬ pg. 34)

● Operation has been attempted when a disc is not loaded, or

loaded upside down. (

੬ pg. 9)

● When a playback-only disc or a finalised disc is loaded, 7 has

been pressed. (

੬ pg. 6)

● An invalid PlusCode number has been input. (੬ pg. 29)

● To set the timer programme using the VIDEO Plus+ system, the

Guide Program Number must be set in advance. (

੬ pg. 83)

● Appears when you tried to input a PlusCode number during

timer recording or instant timer recording.

● A disc loaded cannot be played back on this unit since the region

number of the disc does not match that of the unit. (

੬ pg. 7)

● When an incompatible disc is loaded, 4 has been pressed.

(

੬ pg. 7)

● Formatting is not complete since the disc may be dirty or

damaged. Take out the disc, clean it and retry. (

੬ pg. 9, 89)

● Finalising is not complete since the disc may be dirty or

damaged. Take out the disc, clean it and retry. (

੬ pg. 9, 90)

● Canceling disc finalisation is not complete since the disc may be

dirty or damaged. Take out the disc, clean it and retry. (

੬ pg. 9,

90)

● During Live Memory playback, 8 has been pressed. (੬ pg. 54)

● Timer recording has finished during Live Memory playback.

● Timer recording finished during Live Memory playback, then the

next timer recording is about to begin while playback continues.

● An attempt has been made to record copy-protected contents.

● An attempt has been made to record copy-once contents on a

disc that is not CPRM compatible, such as DVD-R.

● The unit has detected invalid contents at the start or in the

middle of playback.

● An attempt has been made to start DV dubbing when a digital

video camera is not properly connected to the unit.

● Check the connection. (੬ pg. 41)

DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?

INSERT DISC #XXXX

CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES

SET CLOCK BEFORE TIMER PROGRAMMING

PROGRAMME FULL
DELETE UNWANTED TIMER PROGRAMME

NO DISC INSERTED

DISC NOT RECORDABLE
INSERT RECORDABLE DISC

PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY

GUIDE PROGRAMME IS NOT SET
SELECT CHANNEL YOU WANT TO RECORD

CAN NOT SET VIDEO PLUS+ TIMER PROGRAMMING DURING
TIMER RECORDING OR INSTANT TIMER RECORDING
CANCEL TIMER RECORDING OR INSTANT TIMER RECORDING
THEN ENTER THE PLUSCODE NO. AGAIN

REGION CODE ERROR
CHECK DISC

UNREADABLE DISC
CHECK DISC

COULD NOT FORMAT THE DISC
CHECK THE DISC

COULD NOT FINALISE THIS DISC
CHECK THE DISC

COULD NOT CANCEL DISC FINALISATION
CHECK THE DISC

PRESS [STOP] AGAIN TO STOP RECORDING

TIMER RECORDING COMPLETED

PLAYBACK WILL STOP
THEN TIMER RECORDING WILL START

COPY PROHIBITED
CAN NOT RECORD

COPY PROHIBITED
CAN NOT PLAY

THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT
RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY
AND POWERED ON

MV5SEK_00.book Page 94 Wednesday, August 31, 2005 7:58 PM

Advertising
This manual is related to the following products: