JVC DR-MV5BEK - Manual (Page 40)

Filename [MV5SEK_08Basic TimerDub.fm]
Masterpage:Left+
40
EN
EDITING
Page 40Wednesday, 31 August 2005 19:58
Dubbing A Part Of A Disc
You can dub the selected scenes on a DVD disc to a tape, starting
and stopping wherever you wish.
1
For DVD deck
Load a disc you want to dub.
For VHS deck
Load a cassette with the record safety tab intact.
2
Press }DVD to select the dubbing direction.
● “}” lights up on the unit.
3
Prepare the DVD deck for dubbing.
A Press VHS/DVD on the unit repeatedly or DVD on the remote
control so that the DVD lamp lights up on the unit.
B Locate the point from where you want to start dubbing, then
pause playback.
4
Prepare the VHS deck for dubbing.
A Press VHS/DVD on the unit repeatedly or VHS on the remote
control so that the VHS lamp lights up on the unit.
B Press REC MODE repeatedly to set the recording mode.
C Press and hold 9, then press 7 so that the VHS deck enters
the Record Pause mode.
5
Press and hold DUBBING for more than 2 seconds to start the
dubbing.
6
Press 8 to stop recording on the VHS deck.
● Both the VHS deck and the DVD deck are stopped.
● After dubbing is completed, press }DVD so that “}” lights off. If it is
not done, recording on the VHS deck is not possible.
NOTES:
● It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
● There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
● The superimposed indication during the operation or dubbing is not
recorded.
● When the end of the tape is reached during dubbing, dubbing is done
and “[” indicator on the front panel blinks. When pressing x
(EJECT) to eject the tape, “[” indicator on the front panel stops
blinking.
● When the progressive mode is set, “}” does not light up on the unit.
Press PROGRESSIVE SCAN so that video output indicator ( )
lights off on the front display panel.
● It is not possible to perform other operations like Live Memory
Playback. Check the recorded programme on the disc after dubbing.
Manual Dubbing (From DVD To VHS)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
● Make sure that both the DVD deck and the VHS deck are in the
stop mode.
● Set “SUPERIMPOSE” to “OFF”. ( ੬ pg. 79)
DVD
VHS
REC MODE
PROGRESSIVE
SCAN
ENTER
PR +/–
VHS/DVD
DVD VHS REC
VHS DVD DUBBING
PR
DV IN
STANDBY/ON
S-VIDEO VIDEO AUDIO
VHS/DVD DUBBING DVD
MV5SEK_00.book Page 40 Wednesday, August 31, 2005 7:58 PM