Juniper Networks EX4200 - Manual (Page 93)

Table 21: Optical Interface Support for Gigabit Ethernet XFP Transceivers in EX3200 and EX4200
Switches (continued)
Specifications Ethernet Standard
EX-XFP-10GE-ZR Model Number 10GBase-ZR
10 Gbps Rate
LC Connector Type
Dual Fiber Count
1550 nm Transmitter Wavelength
0 Minimum Launch Power
4 dBm Maximum Launch Power
–30 dBm Minimum Receiver Sensitivity
–7 dBm Maximum Input Power
SMF Fiber Type
9/125 µm Core/Cladding Size
– Modal Bandwidth
80 km (49.7 miles) Distance
Available DOM Support
Related Topics ■ Uplink Modules in EX3200 and EX4200 Switches on page 33
■ show interfaces diagnostics optics
■ Installing a Transceiver in an EX Series Switch on page 136
■ Removing a Transceiver from an EX Series Switch on page 177
Uplink Modules Connector Pinout Information for EX3200 and EX4200 Switches
EX3200 and EX4200 switches have a field-replaceable unit (FRU) uplink module on
the front panel. Table 22 on page 68 provides the uplink modules connector pinout
information.
NOTE: You can use these ports to connect an access switch to a distribution switch.
You can also use optional uplink module ports to connect members of a Virtual
Chassis across multiple wiring closets.
Uplink Modules Connector Pinout Information for EX3200 and EX4200 Switches ■ 67
Chapter 3: Component Specifications