JVC CA-HXZ30 - Manual (Page 20)

15
English
Track number Elapsed playing time
Tracks of the currently playing CD (Track
numbers exceeding 16 are not displayed.)
CORRECT INCORRECT
Group title of the 1st group*
Group number flashes
CD1 CD2 CD3 CD4 CD5
CD1 CD2 CD3 CD4 CD5
Loading Discs
On the unit ONLY:
1
Press
0 for the disc tray (CD1 – CD5) you
want to load a disc onto.
The unit automatically turns on and the disc tray comes
out.
2
Place a disc correctly on the circle of the disc
tray, with its label side up.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press the same
0 you have pressed in step 1 .
The disc tray closes.
When loading more than one disc
When you press 0 for the next tray you want to place another disc
onto, the first disc tray automatically closes and then the next tray
comes out.
Playing Back the Entire Discs—Continuous Play
You can play discs continuously.
• If you start Continuous Play with an MP3 disc, you can
select a track to start playback.
7 For audio CDs
1
Load discs.
2
Press one of the corresponding disc number
buttons (CD1 – CD5) for the disc you want to
play.
The unit searches for the disc, and starts playing with the
first track of the selected disc.
7 For MP3 discs
1
Load discs.
2
Press one of the corresponding disc number
buttons (CD1 – CD5) you load discs in step
1 .
The unit searches for the disc (it may take time), and
starts playing the first track of the disc.
• The MP3 indicator lights up on the display.
3
Press
7.
The group title of the 1st group appears on the display,
then the group number starts flashing.
* If the entire group title cannot be shown (exceeds
10 characters), the title scrolls.
Playing Back Discs
CD1 CD2 CD3 CD4 CD5
EN13-20.HX-Z10&30[UW&UJ]1 03.3.6, 5:23 PM 15