JVC CA-HXZ30 - Manual (Page 21)

16
English
Continued
Track title**
Track number
Group number Elapsed playing time
PRESET
T U N IN
G
CD
CD
PRESET
T U N
IN
G
T U N
IN
G /BEEP
4
Select a group and track to start
playing.
1) Turn ¢ / 4 (or press ¢ (¡) /
4 (1) on the remote control) to
select a group you want, then press
CD
3¥8.
The track number starts flashing.
2) Turn ¢ / 4 (or press ¢ (¡) / 4 (1) on
the remote control) to select a track you want to start
playback with, then press CD
3¥8.
** If the entire track title cannot be shown (exceeds
10 characters), the title scrolls.
Playback starts with the selected track of the selected group.
To stop playing, press
7.
To remove the disc, press 0 for the corresponding disc tray.
Disc playback sequence
When discs* in more than one tray are loaded on the disc
trays, they are played in sequence as follows:
Ex.: When CD2 is pressed:
CD2 ] CD3 ] CD4 ] CD5 ] CD1 (then stops)
* When no disc is loaded on the tray, that disc number is
skipped.
CD1 CD2 CD3 CD4 CD5
Basic Disc Operations
While playing a disc, you can do the following operations.
To exchange discs during playback of another disc
Press 0 corresponding to a disc (CD1 – CD5), not playing or
selected currently, to eject and exchange the disc.
If you exchange discs during play, the current play will not
stop until all discs you have exchanged are played.
To stop play for a moment
Press CD 3¥8.
While pausing, the elapsed playing time
flashes on the display.
To resume playing, press CD 3¥8 again.
To go to another track
For audio CDs: Before or during play
For MP3 discs: During play
Turn ¢ / 4 (or press ¢ (¡) /
4 (1) on the remote control).
• ¢ (or ¢ (¡)):
Skips to the beginning of the next
or succeeding tracks.
• 4 (or 4 (1)):
Goes back to the beginning of the current or previous
tracks.
To locate a particular point in a track
During play, press and hold
¡ or
1 (or ¢ (¡) / 4 (1) on
the remote control).
•
¡ (or ¢ (¡)): Fast-forwards the
disc.
• 1 (or 4 (1)): Fast-reverses the disc.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) before or
during play allows you to start playing the
track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10,
then 5.
For track number 20, press +10,
then 10.
For track number 32, press +10
three times, then 2.
For track number 132, press +10
thirteen times, then 2.
FM MODE
Track number flashes
EN13-20.HX-Z10&30[UW&UJ]1 03.3.6, 5:23 PM 16