JVC MX-C55 - Manual (Page 10)

7
1 Connect the AM antenna to the AM terminal
on the rear of the unit.
2 Turn the AM loop antenna until you have the
best reception.
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
1 Press and hold the clamp of the speaker
terminal on the rear of the unit.
2 Insert the end of the speaker cord into the
terminal.
Match the colors (polarity): Blue (+) to blue (+) and black
(–) to black (–); red (+) to red (+) and black (–) to black
(–).
3 Release the finger from the clamp.
IMPORTANT:
• Use only speakers with the same speaker impedance as
indicated by the speaker terminals on the rear of the
unit.
• DO NOT connect more than one speaker to one speaker
terminal.
AM antenna
AM loop antenna
(supplied)
Connecting Speakers
From left
main
speaker’s
terminals
Speaker cord
(red/black)
From left
subwoofer’s
terminals
From right
main
speaker’s
terminals
From right
subwoofer’s
terminals
1
Black Black
Blue
1
DO NOT carry the speaker by holding the tube
duct (on the top of the speaker).
2
2, 3
Red
Speaker cord
(blue/black)
Speaker cord
(blue/black)
MXC55[J]_01-08.p65 2/16/06, 2:46 PM 7