Getting started, Unpacking, Inserting the batteries into the remote control – JVC MX-C55 User Manual

Page 9: Connecting antennas

Advertising
background image

6

1

Connect the FM antenna to the FM [75

]

coaxial terminal.

2

Extend the FM antenna.

3

Fix it in the position which gives you the best
reception, on the wall, etc.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary
measure. If reception is poor, you can connect an outdoor FM
antenna.

To connect an outdoor FM antenna

Before connecting it, disconnect the supplied FM antenna.

Getting Started

Unpacking

After unpacking, check if you have all the following
accessories.
The number in the parentheses indicates the quantity of the
pieces supplied.

• AM loop antenna (1)
• FM antenna (1)
• Remote control (1)
• Batteries (2)

If any is missing, consult your dealer immediately.

Inserting the Batteries into the Remote Control

Insert the batteries—R6P(SUM-3)/AA(15F)—into the remote
control, by matching the polarity (+ and –) on the batteries
with the + and – markings on the battery compartment.
When the remote control can no longer operate the unit,
replace both batteries at the same time.

• DO NOT use an old battery together with a new one.
• DO NOT use different types of batteries together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery

compartment when you are not going to use the
remote control for an extended period of time.
Otherwise, it will be damaged from battery leakage.

R6P(SUM-3)/AA(15F)

Connecting Antennas

FM antenna

FM antenna (supplied)

Outdoor FM antenna
(not supplied)

A 75

antenna with coaxial type connector should be

used.

1

3

2

Continued

Advertising