JVC TK-C1530U - Manual (Page 25)

48
Setting
TITLE/VIDEO screen (continued)
Item Functions and settings
BLC MODE Sets the backlight compensation function. Set this item
when there is a bright light source in the background of
the object and the object becomes dark in the automatic
iris function. Set such that unnecessary light source is
outside the photometry area.
OFF
: No backlight compensation.
AREA1 to AREA4 : Refer to the diagram below to set
the item.
[Default setting: OFF]
IRIS MODE This item sets the setting for automatic iris operation.
AUTO
: Automatic iris is enabled.
OPEN : Forces the automatic iris to open.
[Default setting: AUTO]
Memo:
● This setting does not function when a manual iris lens
is used.
S.E.C (Smart
Edge Control) This item emphasizes images with very fine and detailed
parts. This will increase the visual resolution of the
image.
[Setting: ON, OFF]
[Default setting: OFF]
Memo:
● Some objects may cause the image noise to be
significant.
OFF AREA 1 AREA 2 AREA 3 AREA 4
Photometry
area
: Only for TK-C1530U/E and TK-C1531EG
49
DISPLAY screen
Item Functions and settings
MONITOR
TYPE This sets the monitor type.
You can change the output video settings according to
the type of monitor used. Select an appropriate mode.
[Setting: CRT,LCD1,LCD2]
[Default setting: CRT]
LL ADJUSTMENT screen
Item Functions and settings
V.PHASE This adjusts the vertical synchronization to those of other
cameras when a selector switch for the synchronizing
system on the back of the camera is at
ALLB.
TK-C1530U /TK-C925U
This item can only operate in a region with a power
frequency of 60 Hz.
[Setting: -131 to 0 to 131]
[Default setting: 0]
TK-C1530E/TK-C1531EG /TK-C925E/TK-C926EG
This item can only operate in a region with a power
frequency of 50 Hz.
[Setting: -156 to 0 to 156]
[Default setting: 0]
Memo:
● When set to AINTB, A- - -B will be displayed and
settings is disabled.