JVC TK-C1530U - Manual (Page 31)

60
Detailed setting
You can use the switching signal from an external control device to link the
B&W/Color switching or near-infrared illumination of this camera.
Consult your nearby JVC’s dealer on the connecting devices.
Example)
AUX MODE
: IR IN
INPUT POLARITY : In the case of MAKE ( A Pg. 38)
Control by B&W/Color switching signal from external
CLASS 2 ONLY(U TYPE)
ISOLATED POWER ONLY(E TYPE) SEE INSTRUCTION MANUAL
POWER
VIDEO OUT
SELECTOR
SET
MENU
INT LL
ON
RX TERM-OFF
+
1 2
DC12V d AC24V H
External control device
Sensor or switch
Infrared illumination
B&W : MAKE signal
Color : BREAK signal
CLASS 2 ONLY(U TYPE)
ISOLATED POWER ONLY(E TYPE) SEE INSTRUCTION MANUAL
POWER
VIDEO OUT
SELECTOR
SET
MENU
INT LL
ON
RX TERM-OFF
+
1 2
DC12V d AC24V H
MENU button
SET button and SELECTOR switch
61
Ⅵ When performing only B&W/Color mode switching without changing
other video settings
1. Select the item AUX MODE on the AUX FUNCTION screen.
2. Press the SELECTOR switch left or right ( H, I) and set to AIR INB.
Ⅵ To switch AGC and SHUTTER settings together with B&W/Color
mode switching
Make individual settings for B&W and Color in ASCENE AB and ASCENE
B B and set AUX MODE in AUX FUNCTION to ASCENE INB.
For details, see AScene file functionB (A Pg. 64).
Memo:
● In the case of B&W/Color mode, the lens performance may cause the
image to be out of focus when the illumination of the object is near-infrared
light. In this case, use a lens that is compatible with near-infrared light.
AUX FUNCTION
E AUX MODE IR IN
INPUT POLARITY MAKE
<MENU>RETURN
AUX FUNCTION screen
: Only for TK-C1530U/E and TK-C1531EG