Samsung SV-5000 - Manual (Page 39)

35
GB
STROBE
You can see still images in succession.
1 Press the STROBE button during playback.
Result:
“STROBE” is displayed on the screen.
A Discrete image is displayed on screen similar to
SLOW mode.
2 Press the +/- button to vary the speed of the STROBE mode.
3 To exit the STROBE mode, press the STROBE button.
When in the ART mode, the picture contrast is changed to
resemble artwork.
1 Press the ART button during PLAY or STROBE mode.
Result:
The contrast of the image is changed.
2 Press the +/- button to vary the contrast of the ART mode.
3 To exit the ART mode, press the ART button.
ART
ART INPUT
2 3
5 6
8 9
CLR/RST
CH
STROBE AUDIO
ART INPUT
5 6
8 9
0
CLR/RST
CH
REW
PLAY
F.F
1
2
ART INPUT
2 3
5 6
8 9
CLR/RST
CH
STROBE AUDIO
ART INPUT
5 6
8 9
0
CLR/RST
CH
REW
PLAY
F.F
1
2
DISPLAY MONITOR A.DUB
REC P/STILL
INPUT
SYSTEM OUTPUT
SYSTEM
STOP
1
MONITOR
You can see the original input signal during a conversion recording.
1 Press the MONITOR button during conversion.
Result:
◆ Original input signal is displayed on screen.
2 Press the MONITOR button again.
Result:
◆ The converted output signal is displayed on screen.
SV-5000W/SECA3 4/1/1 12:17 AM Page 35