Samsung SV-5000 - Manual (Page 41)

37
GB
The tape counter:
◆ indicates the elapsed time in the play and record modes
(hours, minutes and seconds) ;
◆ is reset when a cassette is inserted in the VCR ; and
◆ enables you to find the beginning of a sequence easily.
☛
To enable the remaining time to be calculated correctly,
you must indicate the type of cassette being used. See
page 22.
1 Insert a cassette in your VCR.
2 Press CLK/COUNT twice.
Result:
The tape counter is displayed:
0:00:00 .
➢
The tape counter does not necessarily start from zero at the
beginning of the tape.
3 Select the required operation (play, record, fast-forward, rewind).
Result:
The tape counter indicates how long the cassette has
been running.
4 To set the tape counter to zero at the beginning of a sequence:
◆ press DISPLAY twice to display the counter ; and
◆ press CLR/RST when you want to set the tape counter to
zero.
5 To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press REW (
) or F.F ( ).
Result: The VCR stops automatically when the counter
reaches zero.
➢
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 17).
Press DISPLAY:
◆ once to display the current function, program
number, recording speed, date, time and counter ;
◆ twice to display the counter only ;
◆ three times to display the time remaining on the
cassette ; and
◆ four times to clear the display.
PB DTR INDEX DUB PB DTR INDEX DUB Hi-Fi
EX REC.SPEED CLK/COUNT PICTURE TIMER
ART INPUT
2 3
STROBE AUDIO
Using the Tape Counter
0:00:00
0
CLR/RST 100
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC P/STILL STOP
2
4
4
SV-5000W/SECA4 4/1/1 12:18 AM Page 37