Sony CMT-CPX11 - Manual (Page 10)

10 GB
You can make a program of up to 25 steps.
You can synchro record the programmed tracks
onto a cassette tape (page 15).
1
Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2
Press PLAY MODE in stop mode
repeatedly until “PROGRAM” appears.
3
Press ./> repeatedly until the
desired track number appears.
When programing an MP3, press ALBUM
+/– repeatedly to select the album, then
press ./> repeatedly until the
desired track number appears.
4
Press ENTER (or PLAY MODE).
The track is programmed.
The program step number appears,
followed by the last programmed track
number.
5
To program additional tracks, repeat
steps 3 and 4.
6
Press N (or CD NX on the unit).
Program Play starts.
Other operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press N.
However, the program is cleared when you eject the
disc.
• “– –.– –” appears if the total program time exceeds
100 minutes, if you select a track whose number is 21
or over, or when you programed an MP3 audio track.
Creating your own
program
— Program Play
Selected track number Total playing time
To Do this
Cancel Program Play Press PLAY MODE in stop
mode repeatedly until both
“PROGRAM” and
“SHUFFLE” disappear.
Erase the program Press CLEAR in step 4.
Each time you press the
button, a track is cleared
from the end of the
program.
Add a track to the end of
the program Perform steps 3 and 4 in
stop mode.