Sony CMT-CPX11 - Manual (Page 15)

T
a
p
e
–
R
eco
rd
in
g
15 GB
You can record a whole CD on a tape.
You can use TYPE I (normal) tape.
Use buttons on the unit for the operation.
1
Load a recordable tape.
2
Load a CD you want to record.
When you want to record an album from an
MP3 disc, be sure to press PLAY MODE to
select ALBM, then use ALBUM +/– to
select the desired album before proceeding.
3
Press CD SYNCHRO.
“SYNC”, “REC” and “N” (or “n”)
appears. The tape deck stands by for
recording and the CD player pauses for
playback.
4
Press DIRECTION on the unit
repeatedly until
g appears to record
on one side or h (or j ) to record on
both sides.
5
Press TAPE nN repeatedly to select
recording side.
If you select both sides recording or front
side recording, press TAPE nN until
“N” appears. If you record on the reverse
side, press TAPE nN again until “n”
appears.
6
Press TAPE X .
Recording starts.
When the recording is completed, the CD
player and the tape deck stop automatically.
To stop recording
Press TAPE x.
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 2 and 3,
perform steps 1 to 5 of “Creating your own
program” (page 10).
Tip
If you select both sides recording and the tape reaches
the end of the front side part-way through a track, the
entire track is recorded again from the beginning of the
reverse side.
Tape – Recording
Recording your favorite
CD tracks on a tape
— CD-Tape Synchro Recording