Messages, About the disc in the, M essage s – Sony CMT-CPX11 User Manual

Page 26

Advertising
background image

26

GB

The tape does not record.

• No cassette is loaded. Load a cassette.

• The tab has been removed from the cassette.

Cover the broken tab with adhesive tape
(page 29).

• The tape has wound to the end.

Optional components

There is no sound.

• Refer to General item “There is no sound.”

(page 24) and check the condition of the system.

• Connect the component properly (page 22) while

checking:

– if the cords are connected properly.

– if the cord plugs are firmly inserted all the way.

• Turn on the connected component.

• Refer to the operating instructions supplied with

the connected component and start playing.

• Press FUNCTION repeatedly to select “MD” or

“VIDEO” (page 23).

The sound is distorted.

• Set the volume of the connected component

lower.

If the system still does not
operate properly after performing
the above measures, reset the
system as follows:

1

Disconnect the mains lead.

2

Reconnect the mains lead.

3

Press

?/1

to turn on the system.

4

Press TAPE

x

, CD

x

and

?/1

on the unit.

The system is reset to the factory settings. You
should set the settings you made, such as the
preset stations, clock, and timer.

One of the following messages may appear or
flash in the display during operation.

CD/MP3

NO DISC

There is no disc in the player.

NO STEP

All of the programmed tracks have been erased.

OVER

You have reached the end of the disc while pressing
M during playback or pause.

PUSH STOP

You pressed PLAY MODE during playback.

STEP FULL

You tried to program 25 or more tracks (steps).

Tuner

COMPLETE

The preset operation ended normally.

Tape

NO TAB

You cannot record the tape because the tab has been
removed from the cassette.

NO TAPE

There is no tape in the tape deck.

Timer

PUSH SELECT

You tried to set the clock or timer during timer
operation.

SET CLOCK

You tried to select the timer with the clock not set.

SET TIMER

You cannot select the timer function when the Play
Timer or Timer Recording are not set.

TIME NG

Play Timer or Timer Recording start and end times
are set to the same time.

Messages

continued

Advertising