Smart Technologies SMART Meeting Pro 3.1 - Manual (Page 44)

g To add an e-mail address to the registry entry after installation
1. Select Start > Run.
The Run dialog box appears.
2. Type regedit, and then click OK.
The Registry Editor window appears.
3. Use the following table to locate the appropriate key for your operating system.
Operating system Folder location:
Windows XP and
Windows 7 (32-bit)
operating system HKEY_LOCAL_MACHINE\Software\SMART
Technologies\SMART Meeting Pro\Version 3.1\MSExchange
Windows 7 (64-bit)
operating systems HKEY_LOCAL_MACHINE\Software\Wow6432Node\SMART
Technologies\SMART Meeting Pro\Version 3.1\MSExchange
4. Right-click MeetingRoomEmail, and then select Modify.
5. Type the room resource computer’s unique e-mail address in the Value data box, and then click
OK.
6. Close the Registry Editor window.
7. Restart SMART Meeting Pro software.
Orienting your SMART Board interactive
whiteboards after installation
If after you install SMART Meeting Pro software on a multiple display system your touch on one
screen registers on another, you must orient your interactive product again.
Use the following procedure to orient your interactive product using SMART Settings.
T I P
You can also access the screen orientation procedure from the Pen Tray. See your interactive
product’s user’s guide for more information.
g To orient multiple interactive products
1. Press the SMART Meeting Pro icon in the notification area, and then select
SMART Settings.
C H A P T E R 4
Configuring SMART Meeting Pro software
38