Samsung SPH-m50 - Manual (Page 23)

Phone Basics 17
Phone Basics
Tip
: To redial your last recent call, press twice.
Tip
: Some networks support + dialing. + dialing automatically indicates to the
network that you are dialing an international call and adds the international dialing
prefix (typically ‘001’) to the call automatically. To use + dialing, press and
hold
(until the + appears) before entering the phone number.
You can also place calls from your phone by using Voice Command (page 30),
Speed Dialing numbers from your Contacts (page 21), and using your Call History
listings (page 53).
Answering Calls
To answer an incoming call:
1.
Make sure your phone is on. (If your phone is off, incoming calls go to
Voicemail.)
2.
Press to answer an incoming call. (Depending on your phone’s
settings, you may also answer incoming calls by opening the flip cover
or by pressing any number key. See “Call Answer Mode” on page 121
for more information.)
Your phone notifies you of incoming calls in the following ways:
•
The phone rings or vibrates (unless set to Silence All).
•
The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts, the Contacts entry’s
name is displayed. The caller’s phone number may also be displayed, if available.
The following options are also available to handle an incoming call:
•
Press or the volume key to quiet the ringer.
•
Press the right softkey for Ignore or press and hold the volume key to
send the incoming call to your Voicemail box immediately.
Note
: When your phone is off, incoming calls go to Voicemail.
TALK
Next
0
TALK
END