Samsung SPH-m50 - Manual (Page 67)

Bluetooth 61
Blu
etoot
h
3.
If no devices are currently listed, press the left softkey for Add New.
Otherwise press the right softkey for Options and select Search
again.
4.
Select Search and press . Your phone displays a list of discovered
in-range Bluetooth devices.
5.
Select the device you wish to pair with and press the left softkey for
Add to List
.
6.
Enter the passkey and press .
7.
The name of the Bluetooth device is displayed. Press the left
softkey
for Done.
8.
Highlight the device and press the left softkey for Connect.
Connection Successful
will display if the device is connected properly.
Waiting for Pairing
If you are going to be using a Dial-Up Network (DUN) profile to pair with a PC or
PDA, you will need to allow the other device to initiate pairing with your phone.
To allow your phone to be paired with another Bluetooth device:
1.
Press , followed by for Bluetooth.
2.
Press for
Trusted Devices
.
3.
If no devices are currently listed, press the left softkey for Add
New
. Otherwise press the right softkey for Options and select Add
New.
4.
Select Wait for request and press .
5.
Select Always Visible or Visible for 3min and press . For
information on these options, see "Visibility" on page 59.
6.
Enter the passkey and press .
7.
Follow the on screen prompts to enter your passkey and press .
8.
Highlight the device you wish to connect to and press the left
softkey
for Connect. Connection Successful will display if the
device is connected properly.
MENU
OK
MENU
OK
MENU
OK
4
GHI
1
MENU
OK
MENU
OK
MENU
OK
MENU
OK