Sanyo SID-70 - Manual (Page 8)

COLOR DOME CAMERA User Guide 14 COLOR DOME CAMERA User Guide 15
Operating Your Camera
• Be sure to connect power only after all the installation is complete.
• Note that AC / DC adaptor is not supplied with camera.
• Ground should be connected to the GND terminal.
Notes Menu Configuration
Connection
MAIN SETUP
LENS ●DC…
EXPOSURE
●BRIGHTNESS… ●SHUTTER………………… ●AGC………
●SENS-UP ●RETURN
WHITE BAL
●ATW… ●OUTDOOR… ●INDOOR…
●MANUAL… ●AWC→SET
SSDR ●OFF… ●ON
BACKLIGHT ● OFF … ● BLC … ● HLC
SSNR3 ● OFF … ● ON
DAY/NIGHT ● COLOR … ● B/W … ● AUTO
SPECIAL
● IMAGE ADJ … ● MONITOR … ● CAM TITLE …
● SYNC ● MOTION DET … ● PRIVACY ……
● DIS … ● LANGUAGE … ● RETURN
EXIT ● SAVE … ● NOT SAVE … ● RESET
• Coaxial Communications System
• OSD Control method
Using Coaxial Communications
Distance Recommended Cable Specification
300m 3C2V(RG-59/U)
450m 5C2V(RG-6/U)
600m 7C2V(RG-11/U)
• Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial
cable, shown below : If the distance between the camera and the monitor
exceeds the recommended maximum, please use an auxiliary video amp.
• It is recommended that pure copper coax cable is used and not copper coated
steel, as this will cause issues with the communication over the coaxial cable.
Notes
CAMERA DVR CONTROLLER
SET MENU/ENTER OSD KEY
UP UP KEY JOYSTICK UP
DOWN DOWN KEY JOYSTICK DOWN
LEFT LEFT KEY JOYSTICK LEFT
RIGHT RIGHT KEY JOYSTICK RIGHT
DVD
DVR
• : BNC
• ---- : RS-485