Sanyo SID-70 - Manual (Page 9)

COLOR DOME CAMERA User Guide 16 COLOR DOME CAMERA User Guide 17
Operating Your Camera
Use the Function Setup switch within the camera.
Function Setup switch
Menu Setup
2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
• An item with the icon also has sub menus. To select a sub menu, select an item with
the icon and press the Function Setup switch.
• An item with the - - - icon is unavailable due to function settings.
Notes
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
9.EXIT
SAVE
Select the function using
the Function Setup switch. Change the status using
the Function Setup switch.
1. Press the Function Setup switch.
• Main setup menu is displayed on the monitor screen.
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed, select‘LENS’by using the Function
Setup switch so that the arrow indicates‘LENS’ .
LENS
MAIN SETUP
1.LENS DC
2.EXPOSURE
2. The Lens mode has sub menu site as listed below.
- BRIGHTNESS : Adjusts the video brightness.
- FOCUS ADJ : To adjust the lens focus correctly, you must activate the Focus Settings
mode. To activate the Focus Settings mode, adjust the lens focus, and then deactivate
the settings mode.
- You can adjust the shutter value of ESC shutter mode.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
EXPOSURE
1. When the SETUP menu screen is displayed, select 'EXPOSURE’ by using the Function
Setup switch so that the arrow indicates 'EXPOSURE’.
2. Select a desired mode using the Function Setup switch.
BRIGHTNESS : Adjusts the video brightness.