SEAL 6500 - Manual (Page 37)

T E C H N I C A L S P E C I F I C A T I O N S
37
Mechanical
Dimensions (H x W x D) 56" x 85" x 57" (1,423mm x 2,159mm x 1,448mm)
Net Weight 1,800 lbs. (818 kg)
Shipping Weight 2,000 lbs. (907 kg)
Roller Construction Four high-release silicone-covered rollers
Process
Max. Working Width 61" maximum (1,550mm)
Max. Roller Speed 15 ft./min. (4.5m/min.)
Core Inner Diameter 3" (76mm)
Maximum Board Thickness 1" (25.4mm)
Nip Settings 0, 1/16, 1/8, 3/16, 1/4, 3/8, 1/2, 3/4, 1 and –1/16"
(0, 2, 3, 5, 6, 10, 13, 19, 25 and -2mm)
Max. Main Roller Temperature 275°F (135°C)
Electrical
Electrical Requirements
Single-phase version 200-240Vac, 50/60Hz, 48A, 2/G
Three-phase version 230/400Vac, 50/60Hz, 22A, 3N/PE
Maximum Power Consumption 11,000 watts
NOTE: Airborne Noise Less than 70DB(A)
Order Codes
SEAL Image 6500 Single-phase 60424
SEAL Image 6500 Three-phase 60425
Each SEAL Image Laminator has a Serial Number Label located on the right-side cabinet when facing the rear. This
label indicates the model type, the electrical requirements, and the laminator serial number (important for reference if
any servicing is required).