SEAL 6500 - Manual (Page 5)

W O R K S P A C E R E Q U I R E M E N T S
5
• Keep the area around your laminator clear with adequate
space around it so you can feed, receive and trim mounted
and/or laminated images.
• An area 15' x 11' (4.5m x 3.4m) is the smallest area
recommended. We recommend a room size of 20' x 18'
(6.1m x 5.49m) to accommodate a laminator and 2
tables 4' x 8' (1.2m x 2.4m) on casters for finishing/
layout work. This area is required for loading and unloading
rolls of material onto the unwind shafts and feeding and
receiving the maximum mounting board lengths into the
laminator correctly.
• NOTE: Maximum board lengths are up to 12 feet long/3.6m.
• The work area should be level, flat, and well lit.
61"/155 cm
61"/155 cm
Maximum board length
Maximum board length
31 inch (Door clearance)
78 cm
Room Length = 2 x max. board length + 59" (150 cm)
59"/150 cm
Minimum Room Width =15 feet/4.5 meter
21"/53cm
Minimum Room Length = 11 feet / 3.4 meter
Rolls of Media
Rolls of Media
21"/53cm
Figure 2. Workspace Area Diagram