Sony CMD-J6 - Manual (Page 14)

14
model name1[MZ-R70] model name2[MZ------]
[3-232-169-11(2)]
masterpage:Left
filename[K:\595_sony\59501001\Cmd_j6\01GB03MAN.fm]
Connecting to the Network
After successfully entering your PIN code, your phone searches for
an available GSM network. The network search is automatic and may
take a few seconds.
You are ready to make and receive calls when the
network operator's name and the signal strength
icon appears on the display.
The following indicates the strength of the received network signal.
If the signal is very weak, there is a risk of losing service.
Strong signal
↔
Weak signal
↔
No service
If you cannot obtain service
If you cannot obtain network service the reception strength may be
too weak. Move to a higher elevation, a window or an open space and
make sure that there is nothing obstructing the antenna.
Roaming
If you are out of range of your “Home” network operator, especially
when abroad, another network operator may be selected
automatically, subject to signal strength and roaming agreements
between network operators. Contact your network operator/service
provider for details.
01GB.book Page 14 Friday, April 27, 2001 1:08 PM