Sony CMD-J6 - Manual (Page 60)

60
model name1[MZ-R70] model name2[MZ------]
[3-232-169-11(2)]
masterpage:Left
filename[K:\595_sony\59501001\Cmd_j6\01GB03MAN.fm]
11
Select Security to choose On for a secure connection to your
gateway (GW port 9203) or Off for a non-secure connection
(GW port 9201) depending on your Network Operator/Service
Provider.
12
Select Details and then Timeout to enter the default timeout
value in seconds specified by your Network Operator/Service
Provider (if your Network Operator/Service Provider does not
specify a value, 120 seconds should be sufficient for most
Network Operators/Service Providers).
Timeout: 120
13
Select the arrow to return to the previous menu. Select Set
Home to set this entry as your home or default address. You
are now ready to begin using WAP! Simply select Home from
the WAP menu to access your home site.
Important Important Important Important Notes
To set up HTML, you will need to set the Server Type to HTML as well as
the Proxy and Details settings. However, with HTML the GW Server and
Security settings are not necessary. Contact your Network Operator/Service
Provider for details.
01GB.book Page 60 Friday, April 27, 2001 1:08 PM