Sony CMD-J6 - Manual (Page 42)

42
model name1[MZ-R70] model name2[MZ------]
[3-232-169-11(2)]
masterpage:Left
filename[K:\595_sony\59501001\Cmd_j6\01GB03MAN.fm]
Call Cost Setting
Call Cost Setting offers a choice of three options:
• Charge Rate
Select Charge Rate to set the currency and price per unit which will
be used to calculate the call cost.
Enter your PIN2 code at the prompt. Enter a currency and the price
per unit (to enter a decimal point, press
or ).
• Charge Limit
Select Charge Limit to set a unit figure at which your phone will not
allow any more calls to be made. (If Unit in the Charge Rate menu
(see above) was selected, enter the Unit value. In case of Currency,
enter the Currency value.
Then enter your PIN2 code at the prompt, then set the charge limit.
• Reset Call Cost
Select Reset Call Cost, enter your PIN2 code and then reset the call
cost.
Important Important Important Important Notes
In order to be able to make phone calls again, reset the Call Cost counter or
enter a higher Charge Limit.
01GB.book Page 42 Friday, April 27, 2001 1:08 PM