Function for conversion of video signals – Sony STR-DG1100 User Manual
Page 31
31
GB
G
e
tting Star
te
d
This receiver is equipped with a function for
converting video signals. You can output the
video signal after connecting this receiver via
the MONITOR VIDEO OUT jack as shown in
the illustration.
• Video signals can be output as HDMI video
and component video signals.
• Component video signals can be output as
HDMI video and video signals.
For details on the video converting function,
see “In the video input/output conversion table
classified by the menu settings” (page 33).
In the video input/output conversion table of the receiver
a : Video signals are converted and output through the video converter.
f : The same type of signal as that of the input signal is output. Video signals are not converted.
X : Video signals are not output.
* Video signals are output when “Resolution” is set to “DIRECT” in the Video settings menu.
Function for conversion of video
signals
Input Signals
Output Signals
BC
ABC
BC
A
B
C
HDMI OUT
COMPONENT VIDEO
MONITOR OUT
MONITOR VIDEO OUT
HDMI IN 1/2/3 A
f
X
X
VIDEO IN B
a
a
a/f*
COMPONENT
VIDEO IN C
a
a/f
a
INPUT jack
OUTPUT jack
continued