Sony STR-DG1100 - Manual (Page 57)

57 GB
Ampl
ifier O
p
e
ration
s
connected to the receiver. The multi-channel
sound can be played back as it is.
Note
Audio signals are not output from the TV’s
speakers when HDMI Audio is set to “AMP.”
x HDMI SW Level
Lets you set the level of the sub woofer to 0 dB
or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for
each HDMI input independently.
• 0 dB
• AUTO
Automatically sets the level to 0 dB or +10
dB depending on the frequency.
• +10 dB
Settings for the system
(System settings menu)
You can use the System settings menu to
customize the settings of the receiver. Select
“System” in the Settings menus. For details on
adjusting the parameters, see “7: Operating the
receiver using the GUI (Graphical User
Interface)” (page 37).
x Screen Saver
Lets you activate the screen saver function for
the GUI menu on the TV connected to the
receiver.
• ON
When there has been no operation attempted
for 15 minutes, the screen saver function is
activated automatically.
• OFF
The screen saver function is disabled.
System settings menu
parameters