Siemens 4000 - Manual (Page 6)

6
Gigaset 4000 Classic, IM1 eng, A31008-G4000-B001-2-6Z19
4000Cla.fm 17.11.00
Preparing the handset
Delivery package
Gigaset 4000 Classic handset, two batteries, charging
unit, belt clip, operating instructions.
Inserting the batteries
● Make sure to insert the batteries the right way
round
– see diagram on the left.
● Replace the cover and push gently upwards until it
clicks into place.
● To open, press the grooved area and slide back.
Charging the batteries
Leave the handset for approx. five hours in
the base station/charging unit to charge the
batteries, as they are not charged when
they leave the factory. The charging status
icon flashes on the handset to indicate that
the batteries are being charged:
See the appendix for a list of recommended batteries.
Before activating your handset, place it
in the Gigaset 4010/4015 Classic base
station with the display facing up-
wards
. After about one minute the
handset's internal number will be dis-
played (e.g. “2”).

Batt. flat
(battery symbol flashes)

Battery 2 /
3
charged

Batteries 1 /
3
charged

Batteries full
+
– +
–
+
–

;
5 h