Sharp FO-IS125N - Manual (Page 25)

Loading Printing Paper
23
1. Installation
Loading Printing Paper
You can load letter or legal size paper in the paper tray.
Maximum number of sheets
(20-lb. copy bond paper at room temperature)
Letter size: Approx. 250 sheets
Legal size: 100 sheets
Caution!
Do not use the blank side of paper that has already been printed on.
1
Fan the paper, and then tap the edges
against a flat surface to even the stack.
2
Pull the paper plate forward
➊
. Squeeze the paper guide and
adjust it to the width of the paper
➋
. Insert the stack of paper
into the tray, print side up
➌
.
3
Push the paper plate back.
•
If you loaded legal size paper (or you
changed the paper size), change the
paper size setting as explained on
pages 136 and 140.
2
1
3
The maximum stack height
should not be higher than
the line on the paper guide