Sharp FO-IS125N - Manual (Page 57)

Adjusting the Resolution and Contrast
55
3. Sending
Fa
x
e
s
Adjusting the Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a
document.
♦
The default resolution setting for faxing is STANDARD. The default contrast
setting is AUTO.
♦
Adjust the settings each time you do not want to use the default settings.
Note: The resolution and contrast settings are only effective for sending a
document. They are not effective for receiving a document.
Resolution settings
Contrast settings
STANDARD Use STANDARD for ordinary documents. This
setting gives you the fastest and most
economical transmission.
FINE Use FINE for documents containing small letters
or fine drawings.
SUPER FINE Use SUPER FINE for documents containing
very small letters or very fine drawings.
HALF TONE Use HALF TONE for photographs and
illustrations. The original will be reproduced in
64 shades of gray.
AUTO Use AUTO for normal documents.
DARK Use DARK for faint documents.