Cleaning the cartridge, Wiping the print nozzles and contacts – Samsung SF3000T User Manual
Page 98
C
ARE AND
M
AINTENANCE
C
HAPTER
E
IGHT :
C
ARE AND
M
AINTENANCE
8.9
Cleaning the Cartridge
Wiping the Print Nozzles and Contacts
When the print is not clear or dots are missing, the problem may be caused by dried
ink on the:
¥ Print Cartridge nozzles
¥ Print Cartridge contacts
¥ Print Cartridge carrier contacts and deflector
1. Remove the Print Cartridge. See
ÔReplacing the Print CartridgeÕ on
page 8.3.
2. Use a clean cloth, dampened with water
only, to gently clean the entire copper-
colored area, including the nozzles and
contacts.
To dissolve any dried ink, hold the
damp cloth against the nozzles for
about three seconds. Gently blot and
wipe dry.
nozzles
contact
area
3. Reinstall the Print Cartridge.
If the line is still broken, clean the
Print Cartridge Carrier contacts.
0-Chapter 8(GODREJ) 9/20/98 5:17 PM Page 10