Samsung SCC-C4255P - Manual (Page 18)

1_ setup
setup
CAmERA SET
You can configure the general settings of the camera module.
Select <mAIN mENU> - <CAmERA SET>.
The Camera Setup menu appears.
Change the settings as necessary, or select
an item to check.
CAmERA ID
Provide the ID and location for a camera that displays on the screen.
Select <CAmERA SET> - <CAmERA ID>.
Use
▲▼ _+ to select a desired character,
then press [ENTER].
In the lower input box of the screen, the
selected character will be entered.
You can enter up to 54 characters including
alphabets, numbers and special characters.
LOCATION : Specify the display position
of the camera ID.
When done, press [ENTER].
The camera ID will be displayed in the specified position.
vPS
If you set it to <ON>, the camera images will be displayed in progressive mode.
VPS is only available for SCC-C4255P and SCC-C4355P.
1.
2.
1.
2.


3.
M 
 CAMERA SET 
CAMERA ID OFF
VPS OFF
IRIS ALC
MOTION (F.FAST) ---
DNR MID
SHUTTER (OFF) ---
SENS-UP AUTO X4
FLICKERLESS OFF
XDR MID
CAMERA ID
A BCDEFGHIJKLMNOPQRSTUVWXYZO
123456789 : ?_+
 ()/
SP   SP LOCATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
EU ENGLISH.indd 18 2009-9-10 13:53:49