Stewart Filmscreen Corp LCD Front Projector - Manual (Page 5)

Preparation
Specifications regarding the individual screen dimensions, weight, mounting
type, and controls are provided by the factory when the unit is ordered.
Before beginning the installation:
‹ Check the specifications for the type of mounting and switch
control to be used.
‹ Ensure that the mounting area and electrical connection are
prepared.
‹ Check the size and weight of the screen to be installed so that
you can plan for the number of people required for the mounting
procedure. You need at least two people to mount the smaller
screens; more are needed for larger, heavier screens.
You will need:
‹ Enough ladders for the personnel supporting the screen during
the mounting process
‹ A level
‹ Fasteners appropriate for the surface on which the screen is
being mounted (See instructions for the type of mount for
recommendations.)
‹ A 5/32” (.4 cm) hex head or Allen wrench
ABT-EM Trapdoor ElectriMask Electriscreen: Owner’s Manual 3
P
REPARING THE
I
NSTALLATION
‹ Before proceeding with the installation of this screen,
take time to thoroughly read and understand these
installation and operation instructions.
‹ All electrical wiring installations must conform to local
and national codes and should be performed by
qualified service personnel.
‹ There are no user-serviceable parts contained within
the unit.
Caution
During installation, do not place the unit on an unstable
cart, stand, table, or ladder. The unit may fall, causing injury
to a child or adult and damage to the unit.