Stewart Filmscreen Corp LCD Front Projector - Manual (Page 6)

Unpacking
1. DO NOT remove the paper hanging from the trapdoor at this
time. You should remove it only after the unit is hung, all electrical
connections have been made, and the screen is in operation.
2. When moving the unit, make sure not to torque or twist the case.
This can cause door alignment problems.
4 Stewart Filmscreen Corporation
Factory Advisory
The factory advises against installing a concealed or
recessed electrical projection screen permanently. You
must be able to access the external end plates should
future service to the internal roller tube/screen assembly
system be necessary.