Sharp Aquos LC 57D90U - Manual (Page 13)

12
Part names
TV (Rear)
* Press RESET if the TV cannot return to its original state after performing various operations.
• AV MODE resets to DYNAMIC (Fixed)
• TV channel returns to initial channel (Air:2ch, Cable:1 or 2ch)
• Audio setting initializes
• Dolby Virtual resets to off
• Image position initializes
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode.
• Pressing RESET will not delete channel preset or secret number. See page 55 for clearing the secret number when you
know it. See page 73 for initializing to the factory preset values when you forget your secret number.
INPUT 3
terminals
INPUT 1
terminals
DIGITAL
CABLE IN
terminal
INPUT 2
terminals
MONITOR OUT terminals
DIGITAL AIR
IN terminal
RESET*
SYSTEM
RESET**
ANALOG IN
terminal
RS-232C terminal
DIGITAL AUDIO
OUTPUT terminal
i.LINK terminals
CableCARD™ slot
AC INPUT terminal INPUT 5 terminals
INPUT 4 terminal
LC-57D90U(E)-001-013 06.1.12, 2:38 PM 12
Black