Sharp Aquos LC 57D90U - Manual (Page 28)

27
Contrast
OPC
Brightness
Color
Tint
Sharpness
Advanced
Reset
[+30]
[ 0]
[ 0]
[ 0]
[ 0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
Backlight [+16] –16 +16
Off On On : Display
Basic adjustment settings
OPC setting
Automatically adjusts the brightness of the screen.
Description
The brightness is fixed at the value set in
“Backlight” (see page 26).
Automatically adjusts
Displays the OPC effect on the screen while
adjusting the brightness of the screen.
Selected item
Off
On
On: Display
NOTE
• When set to “On”, the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
• When set to “On: Display”, OPC effect displays on the
screen while the OPC adjusts the screen brightness.
Advanced picture adjustments
This TV provides various advanced functions for
optimizing the picture quality.
C.M.S. (Color Management System)
Color tone is managed using the six-color adjustment
setting.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
ENTER.
Description
This is a standard to adjust the color either
more reddish or more bluish in tone.
Increases or decreases the saturation of a
selected color.
A higher value makes the image brighter.
A lower value makes the image darker.
Selected item
C.M.S-Hue
C.M.S-
Saturation
C.M.S-
Value
Color temperature
For a better white balance, use color temperature
correction.
Description
White with Bluish tone
White with Reddish tone
Selected item
High
Mid-High
Middle
Mid-Low
Low
Press c/d to select “Picture”.
Press MENU and the MENU screen displays.
Press a/b to select “OPC”.
Press c/d to select “On” or “On: Display”.
Press MENU and the MENU screen displays.
Press c/d to select “Picture”.
Press a/b to select “Advanced”, and then
press ENTER.
Press a/b to select a specific adjustment
item, and then press ENTER.
• You can select “C.M.S-Hue”, “C.M.S-
Saturation”, “C.M.S-Value”, “Color Temp.”,
“Sharpness Enhancement”, “Automatic
Contrast”, “3D-Y/C”, “Monochrome”, “Film
Mode” or “I/P Setting”.
Press a/b (or c/d) to select the desired
parameter.
• See the table for the selectable parameters.
1
2
3
4
1
2
3
4
5
Press MENU to exit.
5
Press MENU to exit.
6
LC-57D90U(E)-026-031 06.1.13, 7:29 AM 27
Black