Sharp Aquos LC 57D90U - Manual (Page 68)

67
Appendix
Removing the stand
Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal.
CAUTION
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
• Since the TV is very heavy, use two or more people to move it.
Before attaching/detaching stand
• Before performing work make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
NOTE
• To attach the stand, perform the above steps in reverse order.
Setting the TV on the wall
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified service professional about using an optional AN-65AG1 bracket to mount the TV to
the wall.
• Carefully read the instructions that come with the bracket before beginning work.
1
2
3
Unfasten the four screws used to secure the bracket in
place. Detach the stand from the TV. (Hold the stand so it will
not drop from the edge of the base area.)
Unfasten the eight screws used to secure the stand in
place.
4
Attach the stand hole covers (supplied with the
product).
LC-57D90U(E)-060-067 06.1.24, 10:12 AM 67
Black